Brushbond Grey

Brushbond provides a seamless, waterproof coating suitable
for use in water tanks, reservoirs, swimming pools, roofs, toilets
and wet areas to ensure water tightness.

Brushbond eff ectively protects against concrete decay providing a long lasting barrier to waterborne corrosive salts and
atmospheric gases.Brushbond is designed to re-face and even
out variations in concrete and masonry surfaces. Brushbond
eff ectively seals concrete masonry walls.

Clean the surface thoroughly, ensuring it’s free from dust, grease.

Mix Brushbond with clean water in a 3:1 ratio to form a smooth paste.

Apply a generous coat using a stiff brush, ensuring even coverage.

Allow the applied Brushbond to set and cure for a minimum of 24 hours.

• Minimum surface preparation needed – Low labour costs.
• Applied directly to the damp concrete and masonry
• Excellent adhesion – Bonds to porous and nonporous
  surfaces.
• Non-toxic-ideal for potable water tanks
• Waterproof – Excellent for damp-proofi ng basements
• Breathable-allows transmission of water vapour from interior
  of building
• Excellent for concrete roof, leaking brick and masonry walls

Brushbond is non-toxic but it is alkaline in nature. Gloves and goggles should be worn. Any splashes to the skin or eyes should be washed off with clean water. In the event of prolonged irritation, medical advice should be sought. Should use a dus mask while handing the powder.

Additionally, when working with the powdered form of Brushbond, it’s crucial to use a dust mask to prevent inhaling fine particles. Proper ventilation in the work area is also recommended. Keep Brushbond out of reach of children and pets. Always follow the manufacturer’s safety instructions and guidelines provided in the product datasheet. Your safety is paramount, and taking these precautions ensures a secure and successful application process.